12 1/2 inch Thicknesser
1 x $450.00 = $450.0016 inch Longworth Chuck
1 x $209.09 = $209.09Tail Stock Swing Away
1 x $177.27 = $177.272480 x 3/8 x 4 TPI
1 x $32.73 = $32.73Tip 7L - Large Round Skew
1 x $8.18 = $8.185pce TCT Hollowing Set
1 x $300.00 = $300.00Epox-E-Glue 150grm
1 x $38.18 = $38.18Sanding Sleeve 11/2 inch diametre x 140mm long 100 Grit
1 x $10.91 = $10.91DMT Diamond Hone Coarse
1 x $18.18 = $18.18Kustom High Speed Polish/Friction Polishing Bars
1 x $23.64 = $23.64Point TCT Cutter
1 x $24.55 = $24.5550mm Velcro Sanding Disc 120 grit pk of10
1 x $3.64 = $3.64DMT Diamond Hone Extra Fine
1 x $18.18 = $18.18Pinned Reg Tooth 20tpi
1 x $10.91 = $10.9150mm Velcro Sanding Disc 320 grit pk of10
1 x $3.64 = $3.6475mm Velcro Sanding Disc 320 grit pk of 10
1 x $6.36 = $6.36Pinned Reg Tooth 25tpi
1 x $10.91 = $10.9114" x 20" Midi Lathe
1 x $1,450.00 = $1,450.00- $3,076.00
- Shopping cart Checkout
Axminster Live Centre with Chip Ejection #2MT
An excellent improvement to our standard hollow live centre, this Evolution Series centre features three chip ejection ports so that during use the bit doesn't have to be completely withdrawn from the tailstock. With short and long removable points, twin ball bearings and an 8mm(5/16") diameter through hole, this centre is an invaluable aid when long hole boring. The short point protrudes a mere 3mm beyond the ring and allows an accurate impression of the ring to be made on the end of the timber. Having made the impression, the point can be removed from the centre and the work relocated on the ring impression, allowing an accurate hole to be bored. When boring right through, the timber is drilled from one end then reversed, a counterbore drive is used to hold the timber in the headstock and the boring process repeated from the tailstock end. Fitting the long point gives good access for all sorts of miniature work, including light pulls and lace bobbins. A truly multi-functional accessory, worthy of a place in any turner's tool kit.