Thompson 1 inch Skew Chisel
1 x $154.55 = $154.55230 x 115 Velcro Sheet 240 grit
1 x $1.36 = $1.36Shark Jaws 88 mm
1 x $101.82 = $101.82230 x 115 Velcro Sheet 320 grit
1 x $1.36 = $1.36Hold Down Kit
1 x $15.45 = $15.45Foredom Micro Motor K.1070-18
1 x $790.91 = $790.91QWS 120mm T Bar Chuck
1 x $227.27 = $227.27Sierra Gold
1 x $10.00 = $10.00100mm Chuck Insert 3/4 x 16 tpi
1 x $40.91 = $40.91Foredom Micro Motor Battery powered K.1030-18
1 x $790.91 = $790.91100mm Chuck Insert 1" 1/4 x 8 tpi
1 x $40.91 = $40.9150mm Velcro Sanding Disc 600 grit pk of10
1 x $3.64 = $3.64Heavy Duty Pen 2M-S - Medium Round-Small
1 x $40.91 = $40.9116pce Saw tooth Bit Set Metric
1 x $100.00 = $100.00100mm White Arabic Clock
1 x $16.36 = $16.36318mm/12 1/2 inch Planer Blades 18%
1 x $81.82 = $81.8210 inch Bandsaw
1 x $453.64 = $453.64Axminster Large Inside/Outside Caliper
1 x $27.27 = $27.2750mm Velcro Sanding Disc 120 grit pk of10
1 x $3.64 = $3.64Two Tone Flip Box single Pen
1 x $10.91 = $10.9150mm Velcro Sanding Disc 180 grit pk of10
1 x $3.64 = $3.64Saburrtooth 1/4 Bull Nose 18BN14 EX-Fine
1 x $26.36 = $26.36100mm Chuck Insert 1" x 10 tpi
1 x $40.91 = $40.91Rifle Pen Clip Gold Pk of 5
1 x $12.73 = $12.73Micro Adjustable Blade Setting Jig
1 x $71.82 = $71.82Acrylic Pen Blank Burnt Orange Pearl
1 x $5.45 = $5.4527/64 Brad Point Drill
1 x $9.09 = $9.09Shark Jaws 55 mm 120
1 x $89.09 = $89.09FM-300 2HP Dust Collector
1 x $450.00 = $450.00125mm Clock Fit Up Fancy Arabic
1 x $22.73 = $22.73Bowl Steady
1 x $113.64 = $113.6410 inch Cabinet Saw
1 x $1,722.73 = $1,722.73- $6,030.00
- Shopping cart Checkout
Foredom Micro Motor K.1070-18
Rotary Handpiece with 1/8" Collet- Australian Plug (K.107018-26)
For high speed applications up to 38,000 rpm including light deburring of cast pieces, bright cutting in jewelry making and fine detailing in wood. Kit includes control box, handpiece with 1/8" collet
Rotary Handpiece with 1/8" Collet- Australian Plug (K.107018-26)
For high speed applications up to 38,000 rpm including light deburring of cast pieces, bright cutting in jewelry making and fine detailing in wood. Kit includes control box, handpiece with 1/8" collet, variable speed foot control, handpiece cradle, spare pair of motor brushes, spare fuse and collet changing wrenches. The control converts AC current to DC current required for the handpiece. Compared to flexible shaft machines, micromotors have less torque, however, their higher speed results in a comparable rate of material removal with a lighter touch. The simple cord connection between the handpiece motor and control box is another key advantage. Unlike the "drag" and general restriction in movement that you have with a shaft and sheath, micromotors offer much greater freedom of movement.
Kits K.1070
- HP4-917 Control Box
- H.MH-170 Handpiece with H.MH-17018 Handpiece with 1/8" Collet installed
- HP4-960 Variable Speed Foot Control
- HP4-933 Handpiece Cradle
- Spare pair of motor brushes, spare fuse, collet changing wrenches.
HP4-917 Control Box is compact with switches on the front for On/Off Power, Forward or Reverse Rotation, and Manual or Foot Speed Control. Speed can be adjusted from low to full speed using the dial on the box or with the foot pedal. An Overload Protector Light is also featured that turns red and sounds a beeping alarm when the motor stalls. This is the same control unit that comes in Micromotor Kits K.1020, K.1080 and K.1090)
H.MH-170 or H.MH-17018 High Speed Rotary Handpiece has a slender, contoured grip for precise and very high speed work and quick release rotary type chuck. It has a fan cooled, brush-type continuous duty motor that runs cool and vibration free with permanently lubricated, shielded ball bearings that require no lubrication.
Optional collets are available separately. Bur changes are quick and easy with a simple twist of the front section of the Handpiece. A cradle is also supplied for the handpiece when not in use. A selection of collet adapters is available for simplifying changes between accessories with different shank sizes.
Handpiece specifications: 6.2" overall length, 5/8" grip diameter, 1" motor diameter, 7.3 oz./208 gr., DC30V/1.2A. CE marked.
d), variable speed foot control, handpiece cradle, spare pair of motor brushes, spare fuse and collet changing wrenches. The control converts AC current to DC current required for the handpiece. Compared to flexible shaft machines, micromotors have less torque, however, their higher speed results in a comparable rate of material removal with a lighter touch. The simple cord connection between the handpiece motor and control box is another key advantage. Unlike the "drag" and general restriction in movement that you have with a shaft and sheath, micromotors offer much greater freedom of movement.
Handpiece specifications: 6.2" overall length, 5/8" grip diameter, 1" motor diameter, 7.3 oz./208 gr., DC30V/1.2A. CE marked.