Sanding Sleeve 1 inch diametre x 90mm long 120 Grit
1 x $9.09 = $9.09Sanding Sleeve 3 inch diametre x 140mm long 120 Grit
1 x $12.73 = $12.73Rapid Cure 250ml
1 x $49.09 = $49.09Woodies Gear Dust Coat
1 x $52.73 = $52.73RZ Filter F1 XLarge
1 x $27.27 = $27.27Sanding Sleeve 2 inch diametre x 140mm long 80 Grit
1 x $12.73 = $12.73Sanding Sleeve 11/2 inch diametre x 140mm long 80 Grit
1 x $10.91 = $10.91JSP Powercap Pre-Filters
1 x $27.27 = $27.27Rustins Plastic Coating Thinners
1 x $30.00 = $30.0014 LED Magnifying Lamp
1 x $71.82 = $71.82Epox-E-Glue 750grm
1 x $70.91 = $70.91Sanding Sleeve 11/2 inch diametre x 140mm long 120 Grit
1 x $10.91 = $10.91Sanding Sleeve 13/4 inch diametre x 140mm long 100 Grit
1 x $10.91 = $10.91No2 MT Lathe Buffing System
1 x $140.91 = $140.91Livos Kunos Natural Oil Sealer 250ml
1 x $40.00 = $40.0014" x 20" Midi Lathe
1 x $1,450.00 = $1,450.00JSP Powercap 8 hour Battery
1 x $300.00 = $300.00Metal Complex Powder Dye 9pk
1 x $131.82 = $131.82West System 1.2lt
1 x $84.55 = $84.55PowerCap IP Face Seal
1 x $23.64 = $23.64Epox-E-Glue 450grm
1 x $51.82 = $51.82Sanding Sleeve 1 inch diametre x 90mm long 100 Grit
1 x $9.09 = $9.09JSP IP Active Powercap Respirator
1 x $863.64 = $863.64JSP IP Powercap Visor
1 x $90.00 = $90.00Sanding Sleeve 1 inch diametre x 90mm long 80 Grit
1 x $9.09 = $9.09Safety Specs
1 x $4.55 = $4.55JSP Powercap Overlays
1 x $44.55 = $44.55Luci Clear Art resin 750ml Pack
1 x $60.91 = $60.91U-Beaut Water Dye pk7
1 x $38.18 = $38.18No2 MT Lathe Buffing System
1 x $140.91 = $140.91Luci Clear Art resin 1.5 Litre Pack
1 x $95.45 = $95.45Epox-E-Glue 150grm
1 x $38.18 = $38.18Push Block x 2
1 x $16.36 = $16.36Sanding Sleeve 11/2 inch diametre x 140mm long 100 Grit
1 x $10.91 = $10.91Colour Coded Cloth Back Abrasive 1 metre 400 Grit Green
1 x $5.45 = $5.45- $4,451.00
- Shopping cart Checkout
Epox-E-Glue 750grm
Epox-E-Glue is specially formulated for joining timber and other things with a high strength fully water proof bond.
Epox-E-Glue is a thixotropic epoxy glue paste which can bridge gaps with a full strength material.
EpoxEGlue is a 1 part epoxy resin to 1 part hardener mix which are mixed together to produce a paste which is put onto one side of the joint. The joint is then assembled, and held together (but not tightly clamped, as that can squeeze all the Epox-E-Glue out of the joint).
Overnight, the Epox-E-Glue will harden into a strong glassy whiteish material which grips tenaciously to the two sides of the joint. The bond is stronger than most timbers, and epoxy glue can be used to bond most materials to most materials. (But not some plastics, and some other plastics and metals require special preparation). Epox-E-Glue is especially good at adhering to concrete and masonry.
Picture for illustration purposes only