Drill Press Mortise Attachment
1 x $113.64 = $113.64Hisimen 10 inch Bandsaw
1 x $453.64 = $453.64Hisimen 6 x 10 Belt and Disc Sander
1 x $535.45 = $535.45Sanding Belt 2260 x 150 100 grit
1 x $29.09 = $29.09Hisimen 15 inch Thicknesser
1 x $2,318.18 = $2,318.18Hold Down Kit
1 x $15.45 = $15.45Techniglue 750ML
1 x $77.27 = $77.27Hisimen 15 inch Spiral cutter head Thicknesser
1 x $3,635.45 = $3,635.45Saburrtooth Sphere 18S38 Coarse
1 x $26.36 = $26.36Sanding Belt 1220 x 150 80 grit
1 x $18.18 = $18.18Sanding Belt 1220 x 150 40 grit
1 x $18.18 = $18.18SIA Cloth Back Abrasive 1 metre 320 Grit
1 x $5.45 = $5.454 Way Pressure Clamp
1 x $50.00 = $50.00West System 1.2lt
1 x $84.55 = $84.55Sanding Belt 2260 x 150 80 grit
1 x $29.09 = $29.09Large Push Stick
1 x $8.18 = $8.183/4 Pipe Clamp
1 x $30.00 = $30.00Sanding Belt 1220 x 150 60 grit
1 x $18.18 = $18.18Sanding Belt 1220 x 150 100 grit
1 x $18.18 = $18.18Hisimen 6 inch Jointer with Spiral Cutter Head
1 x $2,090.00 = $2,090.00Hisimen 14 inch Bandsaw
1 x $1,362.73 = $1,362.73Sanding Belt 1220 x 150 120 grit
1 x $18.18 = $18.18- $12,051.00
- Shopping cart Checkout
West System 1.2lt
Good science is at the heart of West System epoxy. Comprehensive testing is the basis of that science and is essential for the development of improved epoxy formulations and better construction and repair methods. A large portion of West's testing resources are devoted to continuous product development and improvement.
New resin and hardener formulas, ingredients and combinations undergo a wide range of tests to compare fatigue strength, compression strength, glass transition temperature and peak exotherm. Additionally, qualified samples are tested for hardness, tensile strength, tensile elongation, tensile modulus, flexural strength, flexural modulus, heat deflection temperature, impact resistance and moisture exclusion effectiveness.
West System epoxies are set using a 5:1 resin / hardener ratio. Refer to the paired resin & hardener sizes listed in the table below.
Epoxy Safety & Precautions
Epoxies are safe when handled properly. To use West System epoxies safely, you must understand their hazards and take precautions to avoid them. The primary hazard associated with epoxy involves skin contact. West System resins may cause moderate skin irritation. West System hardeners are corrosive and may cause severe skin irritation. Resins and hardeners are also sensitisers and may cause an allergic reaction similar to poison ivy. Susceptibility and the severity of a reaction varies with the individual. Although most people are not sensitive to West System resins and hardeners, the risk of becoming sensitised increases with repeated contact. These hazards also apply to the sanding dust from epoxy that has not fully cured. These hazards decrease as resin/hardener mixtures reach full cure. Refer to product labels or Material Safety Data Sheets (MSDS) for specific product warnings and safety information. West System is considered to be the industry standard epoxy for high strength waterproof adhesives. The 5:1 ratio epoxy makes it easy to dispense and use.
-
new
Woodturners MESH Sanding Box
West System 1.2lt Good science is at the heart of West System epoxy. ...Price: $38.00 -
new
West System Pump Set 1.2LT
West System 1.2lt Good science is at the heart of West System epoxy. ...Price: $39.00