27/64 Brad Point Drill
1 x $9.09 = $9.09Musical Pen Clip Gold PK of 5
1 x $12.73 = $12.73Round TCT Cutter
1 x $24.55 = $24.55Rifle Pen Clip Gold Pk of 5
1 x $12.73 = $12.735 Piece Pen Mill Reamer Set
1 x $36.36 = $36.36Point TCT Cutter
1 x $24.55 = $24.553 pce Replacement TCT Cutters
1 x $68.18 = $68.1810mm Brad Point Drill
1 x $9.09 = $9.093pce TCT Set
1 x $140.91 = $140.915pce TCT Hollowing Set
1 x $300.00 = $300.003/8 Brad Point Drill
1 x $9.09 = $9.097mm Brad Point Long Series Drill
1 x $9.09 = $9.09ER Collet Handle
1 x $100.00 = $100.00Rifle Pen Clip Chrome PK of 5
1 x $12.73 = $12.736pce TCT Set
1 x $254.55 = $254.555pce Chisel Set with ER Collet
1 x $245.45 = $245.45Axminster Large Inside & Outside Caliper Set
1 x $50.00 = $50.00Hisimen 6 x 10 Belt and Disc Sander
1 x $535.45 = $535.45Hisimen 14 inch Bandsaw
1 x $1,362.73 = $1,362.73Hisimen 15 inch Spiral cutter head Thicknesser
1 x $3,635.45 = $3,635.45Hisimen 6 inch Jointer with Spiral Cutter Head
1 x $2,090.00 = $2,090.00Flexible Rule 36 inch long
1 x $14.55 = $14.55Hisimen 15 inch Thicknesser
1 x $2,318.18 = $2,318.18230 x 115 Velcro Sheet 180 grit
1 x $1.36 = $1.36150mm Self centering Dowelling Jig
1 x $100.00 = $100.00230 x 115 Velcro Sheet 400 grit
1 x $1.36 = $1.36Colour Coded Cloth Back Abrasive 1 metre 240 Grit Blue
1 x $5.45 = $5.45230 x 115 Velcro Sheet 120 grit
1 x $1.36 = $1.36Hisimen 10 inch Bandsaw
1 x $453.64 = $453.64U-Beaut Water Dye pk7
1 x $38.18 = $38.18Saburrtooth 1/8 Bull Nose 18BN18 Coarse
1 x $26.36 = $26.36Ubeaut Aussie Oil 250ml
1 x $30.00 = $30.00No2 MT Lathe Buffing System
1 x $140.91 = $140.91Saburrtooth 18C12R2 Fine
1 x $26.36 = $26.36Saburrtooth 18C12R2 Coarse
1 x $26.36 = $26.36Saburrtooth 1/8 Bull Nose 18BN18 Fine
1 x $26.36 = $26.36Seam Ripper Kit GOLD
1 x $12.73 = $12.73Saburrtooth 1/4 Bull Nose 18BN14 EX-Fine
1 x $26.36 = $26.36Saburrtooth Roto Saw 18RS58 Fine
1 x $26.36 = $26.36- $13,440.50
- Shopping cart Checkout
![South East Qld Woodworking Supplies South East Qld Woodworking Supplies](images/store_logo.png)
Kustom High Speed Polish/Friction Polishing Bars
- 60 gram Bars
Kustom High Speed Polish is a food grade buffing/ polishing compound for use with any kind of buffing system.
Great for polishing virtually anything you want to polish on a buffing wheel.
We recommend wearing eye protection while buffing.
Kustom High Speed Polish Step 1 is rated at 50,000 grit
Kustom High Speed Polish Step 2 is rated at 100,000 grit
Kustom High Speed Polish Step 1 and 2 can also be used on a piece of leather as a strop, this can make a knife blade razor sharp and great for maintaining chisels, lathe tools, knives and anything you want to be razor sharp.
Kustom High Speed Polish Step 1: WEAR EYE PROTECTION
Use as buffing compound:
After preparing your piece to be polished with your buffing system of choice using clean or dedicated Step 1 buffing wheel or polisher turn the machine on and gently apply Kustom High Speed Polish Step 1 to the wheel, the friction and heat generated will apply the compound to the wheel.
Once Kustom High Speed Polish is applied to the wheel bring the piece to the wheel and gently work the piece until you have polished all surfaces.
Once you have finished polishing with Step 1 then wipe the piece to remove any excess Step 1 before moving on to Step 2 if required.
Kustom High Speed Polish is a food grade buffing/ polishing compound which works as a friction polish.
Provides a hard, long – wearing, durable gloss finish.
Use as friction polish:
After sanding to at least 400grit apply the bar of Kustom High Speed Polish Step 1 to the piece.
This is achieved by using a high enough RPM and moving the bar along the piece to generate heat to transfer the polish from the bar to the piece to be friction polished.
Colour it like a crayon.
Once Kustom High Speed Polish is applied using paper towel folded length ways (Use of fabrics at own discretion) work the polish into the piece
and then using clean sections of the paper towel work the piece until all the excess has been removed.
For higher level of gloss use Step 2.
Kustom High Speed Polish Step 2: WEAR EYE PROTECTION
Use as buffing compound:
After polishing with Kustom High Speed Polish Step 1 and wiping any excess, using your buffing system and a clean or dedicated buffing wheel or polisher turn the machine on and gently apply Kustom High Speed Polish Step 2 to the wheel, the friction and heat generated will apply the compound to the wheel.
Then proceed to polish the piece you are working on and once you have finished polishing with Step 2 then wipe the piece to remove any excess Step 2.
Kustom High Speed Polish is a food grade buffing/ polishing compound which works as a friction polish.
Provides a hard, long – wearing, durable high gloss finish.
Use as friction polish:
After Polishing with Kustom High Speed Polish Step 1 apply Kustom High Speed Polish Step 2 to the piece.
This is achieved by using a high enough RPM and moving the bar along the piece to generate heat to transfer the polish from the bar to the piece to be friction polished.
Colour it like a crayon.
Once Kustom High Speed Polish is applied using paper towel folded length ways (Use of fabrics at own discretion) work the polish into the piece
and then using clean sections of the paper towel work the piece until all the excess has been removed.