Metal Complex Powder Dye 9pk
1 x $131.82 = $131.82Sanding Belt 1220 x 150 80 grit
1 x $18.18 = $18.18Sanding Belt 2260 x 150 80 grit
1 x $29.09 = $29.09U-Beaut Food Safe Plus 250ml
1 x $13.64 = $13.64Saburrtooth 18C14 EX-Fine
1 x $26.36 = $26.36Sanding Belt 1220 x 150 120 grit
1 x $18.18 = $18.18Sanding Sleeve 3 inch diametre x 140mm long 120 Grit
1 x $12.73 = $12.73Saburrtooth Sphere 18S14 EX-Fine
1 x $26.36 = $26.36JSP Powercap Pre-Filters
1 x $27.27 = $27.27Sanding Sleeve 11/2 inch diametre x 140mm long 100 Grit
1 x $10.91 = $10.91Sanding Belt 1220 x 150 60 grit
1 x $18.18 = $18.1810mm Brad Point Drill
1 x $9.09 = $9.09Flexible Rule 36 inch long
1 x $14.55 = $14.5560 cm Centre finding Rule
1 x $5.45 = $5.45Saburrtooth Bud 18BUD14 Coarse
1 x $26.36 = $26.36Sanding Belt 2260 x 150 100 grit
1 x $29.09 = $29.09Livos Kunos Natural Oil Sealer 250ml
1 x $40.00 = $40.003/8 Brad Point Drill
1 x $9.09 = $9.09Drill Press Mortise Attachment
1 x $126.36 = $126.36Saburrtooth 18CC38 EX-Fine
1 x $26.36 = $26.365pce Mortise Chisel Set
1 x $90.00 = $90.00Sanding Sleeve 1 inch diametre x 90mm long 100 Grit
1 x $9.09 = $9.09Sanding Sleeve 1 inch diametre x 90mm long 80 Grit
1 x $9.09 = $9.09150mm Stainless Steel Vernier Caliper
1 x $30.91 = $30.91No2 MT Lathe Buffing System
1 x $140.91 = $140.91Weecher Reciprocating Hand piece
1 x $100.00 = $100.00Kustom High Speed Polish/Friction Polishing Bars
1 x $23.64 = $23.64Sanding Belt 1220 x 150 100 grit
1 x $18.18 = $18.18Saburrtooth 18C12SE EX-Fine
1 x $26.36 = $26.36Sanding Belt 1220 x 150 40 grit
1 x $18.18 = $18.18U-Beaut Water Dye pk7
1 x $38.18 = $38.18Sanding Sleeve 11/2 inch diametre x 140mm long 120 Grit
1 x $10.91 = $10.91Contour Gauge
1 x $17.27 = $17.27Saburrtooth 1/8 Bull Nose 18BN18 Coarse
1 x $26.36 = $26.3614" x 20" Midi Lathe
1 x $1,450.00 = $1,450.00U-Beaut Shellawax Glow 500ml
1 x $50.91 = $50.9127/64 Brad Point Drill
1 x $9.09 = $9.09Sanding Sleeve 11/2 inch diametre x 140mm long 80 Grit
1 x $10.91 = $10.91Saburrtooth 1/4 Bull Nose 18BN14 EX-Fine
1 x $26.36 = $26.36U-Beaut EEE 250ml
1 x $24.55 = $24.55- $3,025.00
- Shopping cart Checkout
![South East Qld Woodworking Supplies South East Qld Woodworking Supplies](images/store_logo.png)
Kustom High Speed Polish/Friction Polishing Bars
- 60 gram Bars
Kustom High Speed Polish is a food grade buffing/ polishing compound for use with any kind of buffing system.
Great for polishing virtually anything you want to polish on a buffing wheel.
We recommend wearing eye protection while buffing.
Kustom High Speed Polish Step 1 is rated at 50,000 grit
Kustom High Speed Polish Step 2 is rated at 100,000 grit
Kustom High Speed Polish Step 1 and 2 can also be used on a piece of leather as a strop, this can make a knife blade razor sharp and great for maintaining chisels, lathe tools, knives and anything you want to be razor sharp.
Kustom High Speed Polish Step 1: WEAR EYE PROTECTION
Use as buffing compound:
After preparing your piece to be polished with your buffing system of choice using clean or dedicated Step 1 buffing wheel or polisher turn the machine on and gently apply Kustom High Speed Polish Step 1 to the wheel, the friction and heat generated will apply the compound to the wheel.
Once Kustom High Speed Polish is applied to the wheel bring the piece to the wheel and gently work the piece until you have polished all surfaces.
Once you have finished polishing with Step 1 then wipe the piece to remove any excess Step 1 before moving on to Step 2 if required.
Kustom High Speed Polish is a food grade buffing/ polishing compound which works as a friction polish.
Provides a hard, long – wearing, durable gloss finish.
Use as friction polish:
After sanding to at least 400grit apply the bar of Kustom High Speed Polish Step 1 to the piece.
This is achieved by using a high enough RPM and moving the bar along the piece to generate heat to transfer the polish from the bar to the piece to be friction polished.
Colour it like a crayon.
Once Kustom High Speed Polish is applied using paper towel folded length ways (Use of fabrics at own discretion) work the polish into the piece
and then using clean sections of the paper towel work the piece until all the excess has been removed.
For higher level of gloss use Step 2.
Kustom High Speed Polish Step 2: WEAR EYE PROTECTION
Use as buffing compound:
After polishing with Kustom High Speed Polish Step 1 and wiping any excess, using your buffing system and a clean or dedicated buffing wheel or polisher turn the machine on and gently apply Kustom High Speed Polish Step 2 to the wheel, the friction and heat generated will apply the compound to the wheel.
Then proceed to polish the piece you are working on and once you have finished polishing with Step 2 then wipe the piece to remove any excess Step 2.
Kustom High Speed Polish is a food grade buffing/ polishing compound which works as a friction polish.
Provides a hard, long – wearing, durable high gloss finish.
Use as friction polish:
After Polishing with Kustom High Speed Polish Step 1 apply Kustom High Speed Polish Step 2 to the piece.
This is achieved by using a high enough RPM and moving the bar along the piece to generate heat to transfer the polish from the bar to the piece to be friction polished.
Colour it like a crayon.
Once Kustom High Speed Polish is applied using paper towel folded length ways (Use of fabrics at own discretion) work the polish into the piece
and then using clean sections of the paper towel work the piece until all the excess has been removed.