Saburtooth 100mm Carving Disc Doughnut Medium
1 x $104.55 = $104.5513mm Keyless Drill Chuck #2 MT
1 x $62.73 = $62.73PGT Pinless Scroll Saw Blades Double Reverse Tooth 5RG
1 x $10.91 = $10.91Pinless Scroll Saw Blades Crown Tooth 2
1 x $10.91 = $10.91Vicmarc 100mm Chuck Standard Jaw Set
1 x $50.00 = $50.0012 inch Disc Sander
1 x $362.73 = $362.73Push Block x 2
1 x $16.36 = $16.3650mm Clock Fit Up Gold Arabic White Face
1 x $16.36 = $16.36Safety Specs
1 x $4.55 = $4.5550mm Velcro Sanding Disc 320 grit pk of10
1 x $3.64 = $3.64Hisimen 10 inch Bandsaw
1 x $453.64 = $453.643pce Cabinet Scraper set
1 x $22.73 = $22.73Pinless Scroll Saw Blades Skip Tooth 12
1 x $10.91 = $10.91150 mm Face Plate M30 x 3.5
1 x $36.36 = $36.361inch Drive Dog #2 Morse Taper
1 x $44.55 = $44.5550mm Velcro Sanding Disc 240 grit pk of10
1 x $3.64 = $3.64100mm Chuck Insert M30 x 3.5
1 x $40.91 = $40.91Razertip Tip Cleaner
1 x $16.36 = $16.36Tip 1M Medium Skew
1 x $8.18 = $8.18PGT Pinless Scroll Saw Blades 7RG
1 x $10.91 = $10.91PGT Pinless Scroll Saw Blades Double Reverse Tooth 9RG
1 x $10.91 = $10.9118 Inch Bandsaw
1 x $2,544.55 = $2,544.5550mm Velcro Sanding Disc 150 grit pk of10
1 x $3.64 = $3.6475mm Velcro Sanding Disc 80 grit pk of 10
1 x $6.36 = $6.36100mm Chuck Insert 3/4 x 16 tpi
1 x $40.91 = $40.9110 inch Cabinet Saw
1 x $1,722.73 = $1,722.73Heavy Duty Tip 2L - Large Round
1 x $8.18 = $8.1850mm Velcro Sanding Disc 180 grit pk of10
1 x $3.64 = $3.64- $6,195.00
- Shopping cart Checkout
Axminster Live Centre with Chip Ejection #2MT
An excellent improvement to our standard hollow live centre, this Evolution Series centre features three chip ejection ports so that during use the bit doesn't have to be completely withdrawn from the tailstock. With short and long removable points, twin ball bearings and an 8mm(5/16") diameter through hole, this centre is an invaluable aid when long hole boring. The short point protrudes a mere 3mm beyond the ring and allows an accurate impression of the ring to be made on the end of the timber. Having made the impression, the point can be removed from the centre and the work relocated on the ring impression, allowing an accurate hole to be bored. When boring right through, the timber is drilled from one end then reversed, a counterbore drive is used to hold the timber in the headstock and the boring process repeated from the tailstock end. Fitting the long point gives good access for all sorts of miniature work, including light pulls and lace bobbins. A truly multi-functional accessory, worthy of a place in any turner's tool kit.