Centre Finder
1 x $9.09 = $9.0910mm Brad Point Drill
1 x $9.09 = $9.09Drill Press Mortise Attachment
1 x $126.36 = $126.3650mm Gold Clock Fit Up White Face Roman Numbers
1 x $22.73 = $22.73Vicmarc CBN Mounting Bush 5/8 x 32mm
1 x $22.73 = $22.7310 Inch Centre Finder
1 x $25.45 = $25.45TBar Diamond Dresser
1 x $31.82 = $31.8260 cm Centre finding Rule
1 x $5.45 = $5.45150mm Self centering Dowelling Jig
1 x $100.00 = $100.0036mm Clock Fit Up Gold Roman White Face
1 x $14.55 = $14.5536mm Clock Fit Up Gold Arabic White Face
1 x $14.55 = $14.5514" x 20" Midi Lathe
1 x $1,450.00 = $1,450.00Vicmarc CBN Wheel 8 inch 80 Grit
1 x $250.00 = $250.00Vicmarc CBN Mounting Bush 18mm x 32mm
1 x $22.73 = $22.7343mm Clock Fit Up Gold Roman White Face
1 x $16.36 = $16.36Vicmarc CBN Mounting Bush 16mm x 32mm
1 x $22.73 = $22.73Vicmarc CBN Mounting Bush 1/2 x 32mm
1 x $22.73 = $22.7356mm Gold Silver Fit Up White Face Roman Numbers
1 x $22.73 = $22.7345mm Clock Fit Up Gold Roman White Face
1 x $16.36 = $16.36Luci Clear Coating resin 1.5 litre Pack
1 x $95.45 = $95.45Techniglue 750ML
1 x $77.27 = $77.27Luci Clear Art resin 1.5 Litre Pack
1 x $95.45 = $95.45Luci Clear Casting resin 750ml Pack
1 x $60.91 = $60.91Salt & Pepper Inserts
1 x $16.36 = $16.3612 inch Disc Sander
1 x $362.73 = $362.7310 inch Bandsaw
1 x $453.64 = $453.64Hamlet Bowl gouge 1/2 inch
1 x $122.73 = $122.73Bobbin Sander
1 x $631.82 = $631.82Epox-E-Glue 450grm
1 x $51.82 = $51.82Rapid Cure 250ml
1 x $49.09 = $49.09Epox-E-Glue 750grm
1 x $70.91 = $70.91- $4,723.00
- Shopping cart Checkout
West System 4.8lt kit
Good science is at the heart of West System epoxy. Comprehensive testing is the basis of that science and is essential for the development of improved epoxy formulations and better construction and repair methods. A large portion of West's testing resources are devoted to continuous product development and improvement.
New resin and hardener formulas, ingredients and combinations undergo a wide range of tests to compare fatigue strength, compression strength, glass transition temperature and peak exotherm. Additionally, qualified samples are tested for hardness, tensile strength, tensile elongation, tensile modulus, flexural strength, flexural modulus, heat deflection temperature, impact resistance and moisture exclusion effectiveness.
West System epoxies are set using a 5:1 resin / hardener ratio. Refer to the paired resin & hardener sizes listed in the table below.
Epoxy Safety & Precautions
Epoxies are safe when handled properly. To use West System epoxies safely, you must understand their hazards and take precautions to avoid them. The primary hazard associated with epoxy involves skin contact. West System resins may cause moderate skin irritation. West System hardeners are corrosive and may cause severe skin irritation. Resins and hardeners are also sensitisers and may cause an allergic reaction similar to poison ivy. Susceptibility and the severity of a reaction varies with the individual. Although most people are not sensitive to West System resins and hardeners, the risk of becoming sensitised increases with repeated contact. These hazards also apply to the sanding dust from epoxy that has not fully cured. These hazards decrease as resin/hardener mixtures reach full cure. Refer to product labels or Material Safety Data Sheets (MSDS) for specific product warnings and safety information. West System is considered to be the industry standard epoxy for high strength waterproof adhesives. The 5:1 ratio epoxy makes it easy to dispense and use.