Pinned Reg Tooth 20tpi
1 x $10.91 = $10.91Bowl Jaw Accessory pack
1 x $40.91 = $40.912550 x 1/4 x 4 TPI
1 x $32.73 = $32.734 Inch Dust Hose
1 x $15.45 = $15.45Reducer 4" - 2.5" Plastic
1 x $6.36 = $6.36Acrylic Pen Blank Blue Camo
1 x $5.45 = $5.45125mm Clock Fit Up White
1 x $22.73 = $22.73JSP IP Active Powercap Respirator
1 x $863.64 = $863.6418 Inch Bandsaw
1 x $2,544.55 = $2,544.55Burn-through Transfer Paper - 15 Sheets
1 x $13.64 = $13.64Saburtooth 100mm Carving Disc Flat Fine
1 x $95.45 = $95.457mm Brad Point Long Series Drill
1 x $9.09 = $9.09Saburrtooth 1/8 Bull Nose 18BN18 Coarse
1 x $26.36 = $26.36WL1624 Riser Block
1 x $100.00 = $100.00Pinless Scroll Saw Blades Crown Tooth 2/0
1 x $10.91 = $10.91F Clamp Starter Box Set of 12 clamps
1 x $61.82 = $61.82Saburthooth Mini Carving Disc 50mm EX-Coarse Doughnut
1 x $50.00 = $50.00Proxxon Long Neck Mini Grinder
1 x $300.00 = $300.00Comfort Pen Bushing
1 x $9.09 = $9.095pce TCT Hollowing Set
1 x $300.00 = $300.00Acrylic Pen Blank Blue/Red Camo
1 x $5.45 = $5.45Razertip SS-D10
1 x $336.36 = $336.36Perfume Applicator Bushing
1 x $9.09 = $9.09QWS Woodlathe 2242VF
1 x $3,544.55 = $3,544.55Pen-1 7mm Brass Tube
1 x $0.91 = $0.91- $9,257.00
- Shopping cart Checkout
![South East Qld Woodworking Supplies South East Qld Woodworking Supplies](images/store_logo.png)
Kustom High Speed Polish/Friction Polishing Bars
- 60 gram Bars
Kustom High Speed Polish is a food grade buffing/ polishing compound for use with any kind of buffing system.
Great for polishing virtually anything you want to polish on a buffing wheel.
We recommend wearing eye protection while buffing.
Kustom High Speed Polish Step 1 is rated at 50,000 grit
Kustom High Speed Polish Step 2 is rated at 100,000 grit
Kustom High Speed Polish Step 1 and 2 can also be used on a piece of leather as a strop, this can make a knife blade razor sharp and great for maintaining chisels, lathe tools, knives and anything you want to be razor sharp.
Kustom High Speed Polish Step 1: WEAR EYE PROTECTION
Use as buffing compound:
After preparing your piece to be polished with your buffing system of choice using clean or dedicated Step 1 buffing wheel or polisher turn the machine on and gently apply Kustom High Speed Polish Step 1 to the wheel, the friction and heat generated will apply the compound to the wheel.
Once Kustom High Speed Polish is applied to the wheel bring the piece to the wheel and gently work the piece until you have polished all surfaces.
Once you have finished polishing with Step 1 then wipe the piece to remove any excess Step 1 before moving on to Step 2 if required.
Kustom High Speed Polish is a food grade buffing/ polishing compound which works as a friction polish.
Provides a hard, long – wearing, durable gloss finish.
Use as friction polish:
After sanding to at least 400grit apply the bar of Kustom High Speed Polish Step 1 to the piece.
This is achieved by using a high enough RPM and moving the bar along the piece to generate heat to transfer the polish from the bar to the piece to be friction polished.
Colour it like a crayon.
Once Kustom High Speed Polish is applied using paper towel folded length ways (Use of fabrics at own discretion) work the polish into the piece
and then using clean sections of the paper towel work the piece until all the excess has been removed.
For higher level of gloss use Step 2.
Kustom High Speed Polish Step 2: WEAR EYE PROTECTION
Use as buffing compound:
After polishing with Kustom High Speed Polish Step 1 and wiping any excess, using your buffing system and a clean or dedicated buffing wheel or polisher turn the machine on and gently apply Kustom High Speed Polish Step 2 to the wheel, the friction and heat generated will apply the compound to the wheel.
Then proceed to polish the piece you are working on and once you have finished polishing with Step 2 then wipe the piece to remove any excess Step 2.
Kustom High Speed Polish is a food grade buffing/ polishing compound which works as a friction polish.
Provides a hard, long – wearing, durable high gloss finish.
Use as friction polish:
After Polishing with Kustom High Speed Polish Step 1 apply Kustom High Speed Polish Step 2 to the piece.
This is achieved by using a high enough RPM and moving the bar along the piece to generate heat to transfer the polish from the bar to the piece to be friction polished.
Colour it like a crayon.
Once Kustom High Speed Polish is applied using paper towel folded length ways (Use of fabrics at own discretion) work the polish into the piece
and then using clean sections of the paper towel work the piece until all the excess has been removed.